TANDEM 2-AXLE SPREADERS from 5.5 to 6 MT
SPREADS, DISTRIBUTES, AND CONTROLS.
EFFICIENT AND SUSTAINABLE MODELS TO IMPROVE FERTILITY.
Automation is one of our fundamental pillars in machinery development to facilitate field work. Thus, with a control system, distribution can be regulated for uniform spreading across the entire surface.
The auger-type beaters, key to the spreader design, mix and distribute the product, adjusting their speed to ensure proper distribution.
Characteristics
Our trailers feature the most comprehensive elements to ensure perfect operation. That is why we have designed the most efficient structures.
Spreader Construction
Technical data sheet
TANDEM 2-AXLE SPREADERS from 5.5 to 6 MT
APPROXIMATE TARE WEIGHT (depending on options)
6,300 kg
BED LENGTH
5,000 mm
BED WIDTH
2,200 mm
SIDE HEIGHT
1,360mm
FLOOR PLATE THICKNESS
4 mm
NUMBER OF LEAF SPRINGS
3 x 80×25 mm
NEW TYRES
385/65 R 22.5
AXLE AND BRAKE DRUM (mm)
100×80 / 350×90
STUDS AND PRESS
8A 1900mm
LOWER CHASSIS (mm)
250x150x6
BRAKE CYLINDERS
4
HYDRAULIC MOTOR
1 / 150
FRONT TRANSMISSION
CONSTANT VELOCITY JOINT
LONGITUDINAL SHAFT DIAMETER (mm)
45 mm
TRANSVERSE SHAFT DIAMETER FRONT/REAR
40mm /50mm
NUMBER OF CHAINS AND MODEL
4-100 / 8 / 14 R
NUMBER OF REDUCERS AND TYPE
1/RT500
BEATER RPM
540 rpm
APPROXIMATE TARE WEIGHT (depending on options)
6,700 kg
BED LENGTH
6,000 mm
BED WIDTH
2,200 mm
SIDE HEIGHT
1,360mm
FLOOR PLATE THICKNESS
4 mm
NUMBER OF LEAF SPRINGS
4 x 80×25 mm
NEW TYRES
385/65 R 22.5
AXLE AND BRAKE DRUM (mm)
100×80 / 350×90
STUDS AND PRESS
8A 1900mm
LOWER CHASSIS (mm)
250x150x6
BRAKE CYLINDERS
4
HYDRAULIC MOTOR
1 / 200
FRONT TRANSMISSION
CONSTANT VELOCITY JOINT
LONGITUDINAL SHAFT DIAMETER (mm)
45 mm
TRANSVERSE SHAFT DIAMETER FRONT/REAR
40mm /60mm
NUMBER OF CHAINS AND MODEL
4-100 / 8 / 14 R
NUMBER OF REDUCERS AND TYPE
1/RT500
BEATER RPM
540 rpm
