Descripción del producto

CHARACTERISTICS

  • TENSIONING ARCS ON EACH CENTRAL PILLAR
  • PARABOLIC SPRINGS
  • REMOVABLE SIDE HINGES TYPE TIR
  • TEMPERED STEEL FLANGES AND SPRINGS
  • TOOL BOX AND WATER TANK
  • STEEL STRUCTURAL TUBE CHASSIS
  • INTERSPERSED CHASSIS FOR HIGHER HEIGHT AND STABILITY
  • CYLINDER, AXLE, SPRINGS, CHASSIS AND BEARING FOR HEAVY LOADS
  • LOWER RIBS OF 70 x 100 TO 450 mm LIGHT
  • HYDRAULIC BRAKE FOR WHEEL IN THE TWO AXLES
  • PARKING BRAKE
  • SIDE AND BACK HOOKS
  • BALL BEARING
  • THERMOPLASTIC MUDGUARD IN THE 4 WHEELS FROM 12.000 KG
  • APPROVED ELECTRIC INSTALLATION GALVANISED TRAY
  • DRAWBAR SUSPENDED BY A RETENTION AND ADJUSTABLE SPRING
  • CAST CONICAL PILLARS FOR EASY DISASSEMBLY
  • 150 x 50 FRONT PILLARS FOR HIGHER RESISTANCE
  • UP/DOWN SIDE OPENING BACK DOOR
  • CENTRALISED OPENING BACK DOOR
  • TILTING WITH A CYLINDER DIRECT TO THE TRACTOR 45ª
  • BEFORE PICKLING, A PRIMER COAT AND ENAMEL COAT. FURNACE PAINTING AND DRYING
  • POLYURETHANE PAINT

 

FEATURES
MODEL 2RH400L 2R450H 2R500H
APROX. TARE 2.400 2.700 3.000
SILL LENGTH 4.000 4.500 5.000
SILL WIDTH 2.100 2.300 2.450
SIDE HEIGHT + OVERSIDES 750+500 750+600 750+600
NUMBER OF SIDES 4 + door 4 + door 4 + door
SILL PLATE THICKNESS 4 mm 4 mm 4 mm
SIDE PLATE THICKNESS 2,5 mm 2,5 mm 2,5 mm
FRONT PARABOLIC SPRINGS 1 leaf 70×25 2 leaves 70×25 2 leaves 70×25
BACK PARABOLIC SPRINGS 2 leaves 70×25 2 leaves 70×25 3 leaves 70×25
Nº OF WHEELS 4 news 4 news 4 news
WHEEL DIMENSIONS 11’5-13-14PR 285/70 R19.5 285/70 R19.5
AXLE AND DRUM DIMENSIONS – STUDS AND AXLE PRESSER 70×65/
300×60 –
6 to 1700		 80×75 /
300×60 –
6 to 1800		 80×75 /
300×60 –
6 to 1800
LOWER / UPPER CHASSIS 150x100x6/
120×60		 180x100x6/
120×60		 180x100x6/
120×60
BALL BEARING 1.050×14 1.050×14 1.050×14
BRAKE CYLINDERS 1 2 2
NºOF TILTING CYLINDER AND BOTTLE-Nº EXPANSIONS AND
LITRES		 1/112-
4/7 l		 1/124-
4/10 l		 1/152-
5/18 l
APPROXIMATE HEIGHT FROM FLOOR TO GROUND 1.100 1.100 1.100
WHEELS

Productos relacionados